CementWire
Products tagged with: reconditioned
Bosch CLPK21-120 Factory Reconditioned 12-Volt Cordless Screwdriver & Impact
The Bosch CLPK21-120R Factory Reconditioned CLPK21-120 12-Volt Cordless Screwdriver and Impactor Combo Kit includes the Bosch 12-Volt Max Lithium-Ion PS40-2A Impactor Fastening Driver and the PS20-2A Pocket Driver. The CLPK21-120 Compact Lithium-Ion Combo Kit is extremely versatile with two compact, yet powerful, cordless tools that allow you to work in even the tightest spaces. Features: LED light ring on both tools illuminate the work area and tight spaces Quick change chuck on both tools allow for fast and easy bit changes Max mode allows for pilot bit drilling and other small bore holes Compact, lightweight design reduces user fatigue PS20-2A produces 100 inch-pound of torque and is capable of driving 100 3-inch screws per battery charge PS40-2A features 60 percent more torque than standard 18-volt drill/drivers and produces 800 inch-pounds of max torque while its Bosch designed hammer and anvil system delivers 1,800 RPM and 3,000 BPM What's In The Box: Bosch PS40-2AR Impactor Fastening Driver Bosch PS20-2AR Pocket Driver Two 12-Volt Litheon Lithium-Ion Batteries 30-Minute Charger Carrying Case
Bosch CLPK23-180 Factory Reconditioned 18-Volt 2-Tool Lithium Ion Kit
The Bosch CLPK23-180R is a Factory Reconditioned 18-Volt 2-Tool Lithium Ion Kit. This is a factory reconditioned power tool combo pack. Reconditioned generally means that the power tool combo pack has been returned to the manufacturer, who brings the power tool combo pack back to like new condition. Some power tool combo packs may contain cosmetic blemishes. Features: 18V Cordless Litheon Impact Driver - 25618-RT 25% lighter than the competition The most compact design in the market - 25% shorter than the competition at only 5.7" long Faster with more torque at 2,800 RPM and 1,500 in.-lbs. Highest IPM in its category at over 3,200 IPM What's In the Box: Bosch CLPK23-180R Factory Reconditioned 18-Volt 2-Tool Lithium Ion Kit p { margin-bottom: 0.08in; }18V Cordless Litheon Impact Driver – 25618-RT 18V Cordless Litheon Compact Tough Drill/Driver – 36618-RT 2 18V Cordless Litheon™ Slim Pack Batteries – BAT609 One hour charger BC660 Jobsite Bag
Bosch CLPK27-120RT Factory Reconditioned 12-Volt Max Cordless Lithium-Ion 2-Tool
The Bosch CLPK27-120RT Factory Reconditioned 12-Volt Max Cordless Lithium-Ion 2-Tool Combo Kit brings together the Bosch PS21-2A Pocket Driver and the Bosch PS41-2A Impact Driver together in one great kit. Powered by lithium ion batteries, the tools in the Bosch CLPK27-120RT bring together lightweight batteries and compact tools to make extended use easy. Features: Bosch PS41-2A 12-Volt Max Cordless Lithium Ion Impact Driver is able to deliver an amazing 930 inch-pounds of torque LED light ring uses 3 LEDs to illuminate work area for use in dark areas Head length of only 5-1/4-inches allows unit to fit in tight areas Bosch PS21-2A 12-Volt Max Cordless 2-Speed Pocket Driver is able to provide up to 265 inch-pounds of max torque Lightest weight in class allows for extended use with minimal fatigue Bright LED is able to illuminate work area What's In The Box: Bosch PS41-2A 12-Volt Max Cordless Lithium Ion Impact Driver Bosch PS21-2A 12-Volt Max Cordless 2-Speed Pocket Driver Two 12-Volt Max Lithium-Ion Batteries 30-minute Rapid Charger Jobsite Bag
Bosch PB360S Factory Reconditioned Basic Power Box Jobsite Radio
The Bosch PB360S is a Factory Reconditioned Basic Power Box Jobsite Radio. The Bosch PB360S includes an AM/FM radio with 20 FM and 10 AM presets, 4 preset and custom equalizer settings, protective roll cage, 4-way power outlets and 12-volt DC adapter. Operate the Power Box 360 with Bosch 14.4V-18V lithium-ion batteries, or charge them with the unit's built-in battery charger. Features: Premium 360 Degree Stereo Sound - 4 speakers plus subwoofer project sound in different directions Rugged Rubber/Aluminum Roll Cage offers best protection against tough jobsite conditions and weather-resistant design means you can use it anywhere. Runs off of Bosch 14.4V to 18V Lithium Ion Batteries Advanced Digital Tuner - Reception in more places along with SD/USB/Auxiliary/Line-Out Capability Charge Anything! - Charges Bosch 14.4V - 18V Lithium Ion Batteries, 4-way Power Outlets, 12V DC Adapter, Powered USB Port. What's In the Box: Bosch PB360S Factory Reconditioned Basic Power Box Jobsite Radio
Bosch PS50-2A Factory Reconditioned 12-Volt Litheon Cordless Multi-X Cutting Kit
The Bosch PS50-2A Factory Reconditioned 12-Volt Cordless Multi-X Oscillating Tool is versatile and effective at multitasking and uses a fast side-to-side oscillating motion to take on a variety of projects, such as repairs, remodeling, or restoration work. Features: The Multi-X performs like a corded oscillating tool with the functionality of a cordless tool Designed to work with a variety of materials including soft woods, hard woods, drywall, plastic, metals and grouting The compact design allows it to fit into tight spaces and is designed to sand and cut in corners Tool can utilize over 10 different accessories that are able to handle jobs ranging from sanding to grout removal When used with provided adapter the Multi-X can be used with competitors accessories including Dremel, Fein, and Proxxon A screw is used to tighten blades and accessories onto the Multi-X to ensure a strong, secure connection Powerful enough to handle even the toughest jobs the Multi-X has a speed range of 5,000 to 20,000 RPM's Variable speed dial allows you to easily adjust tool speed to fit project Plastic nose of tool designed not to leave marks on work pieces Designed with a soft comfortable grip toward the front of the tool, which allows you complete control of the tool Tool has a power gauge to show when battery is in need of a charge Lithium battery technology holds its charge for up to 6 months so the tool is ready when you are What's In The Box: PS50-2A Multi Tool Two Litheon 12-Volt Max Batteries 30-Minute Charger Adapter Sanding Plate Sanding Paper Pad HCS Plunge Cut Blade Hard Carrying Case
Bostitch CPACK1850BN Factory Reconditioned 2-inch Brad Nailer and Compressor Com
The Bostitch CPACK1850BNR Factory Reconditioned CPACK1850BN 2-inch Brad Nailer and Compressor Combo Kit is a great entryway into pneumatic tools. With the Bostitch SB-1850BN Factory Reconditioned 2-Inch brad nailer and the CAP2000P-OF Factory Reconditioned oil-free compressor you are getting the perfect combo kit for all of your around-the-house projects. In addition to the tool and compressor, you also receive a 25-Foot PVC air hose with fittings, tool lubricant and carrying case. with the CPACK1850BN there isn't a project that you can't tackle. Features: Oil-free pump requires less maintenance 2.8-CFM @ 90-PSI with 150 max. operating pressure for improved tool performance Large 6-gallon reserve tank with ball-type drain valve for easy drainage Impact-resistant composite shroud protects gauges against jobsite damage Adjustable depth guide sets nails to desired depths quickly and conveniently Tool-free adjustable exhaust conveniently directs exhaust away from the user No-mar tip protects work surface Recoil-style air hose included (shown with regular air hose NOT included) What's In The Box: CAP2000P-OFR 2.0 HP (Peak) Oil-Free Compressor SB-1850BNR 2-inch 18 GA Brad Nailer 1/4-inch x 25-foot PVC Recoil-Style Air Hose With Fittings Tool Lubricant Carrying Case
Bostitch F28WW Factory Reconditioned Framing Nailer
The Bostitch F28WW, Factory Reconditioned, Industrial Stick Framing Nailer serves two purposes- framing and metal connecting. With a driving torque of 1050 Inch Lbs, this tool fires a 28-degree wire collated full round head stick nail to a depth of 2 to 3 ½ inches to fasten. Bostictch framing nailer boasts of patented push button that enables setting the depth of the impact, this gives a user the freedom to adjust the depth of nailing entirely depending on the requirement.For easy storage when not in use, this heavy-duty nailer features an adjustable rafter hook. You can just hang the nailer from a rafter or joist and leave it at the jobsite without worrying about its damage. The lightweight magnesium design of this 7.6 lbs power tool makes porting easy and non-strenuous.This cordless tool features specially designed aggressive teeth, particularly to ease the toe nailing process so that you can join two pieces with minimal effort. Applicable for framing, sheathing, installing metal connectors and more the Bostitch F28WW can be branded as the ideal nailer that can take care of multiple applications all by itself. Features: Soft rubber foot helps prevent damage to softer woods Adjustable exhaust directs air away from the user What's In the Box: F28WW Stick Framing Nailer
Bostitch SX1838K Factory Reconditioned Narrow-Crown Stapler
The Bostitch SX1838K Factory Reconditioned Narrow-Crown Stapler is made of lightweight magnesium to help prevent fatigue on larger jobs. The Bostitch SX1838K uses an oil free system to help keep your projects oil-stain free while the selectable trigger system allows for easy conversion between sequential or contact modes. Using the dial-a-depth control for quick countersinking adjustments and a low fastener lockout that prevents dry firing, the Bostitch SX1838K is one of the most desired staplers on the jobsite. Features: Swivel air fitting provides increased maneuverability. Filtered air inlet for improved engine durability Oil-free engine requires no daily maintenance and helps to prevent oil stains on work surfaces Reversible belt hook: with integrated pencil sharpener for ultimate convenience Dial-A-Depth control quickly and conveniently set fasteners to desired depths Easy conversion between sequential or contact modes What's In The Box: Bostitch SX1838K Factory Reconditioned Narrow-Crown Stapler Carrying Case
DeWalt D25701KR Factory Reconditioned 1-7/8-inch SDS Max Combination Hammer
The DeWalt D25701KR Factory Recondtioned 1-7/8-Inch SDS-Max Combination Hammer is a popular choice for drilling and chipping because it can deliver 11.7 foot-pounds of impact enrgy with its 13-amp motor. The D25701KR has the user in mind with such features as Complete Torque Control and Active Vibration Control —both of which give you more control and increased ease-of-use. Features: 13-amp motor provides overload protection and high power Complete Torque Control (CTC) utilizes patented 2-stage clutch for maximum control in bind-up situations SHOCKS Anti-Vibration Control reduced vibration by 70 percent for less user strain and fatigue and increased comfort Rear handle mount is more comfortable to use in down-drilling applications Lock-on side switch provides increased user comfort in extended-use applications Modular design allows easy access to switch, motor, cordset, brushes, and gear case for ease of service 17.5 pounds for portability to and from jobsites What's In The Box: DeWalt D25701R 1-7/8-Inch SDS-Max Combination Hammer Side Handle Heavy-Duty Kit Box
DeWalt D51825R Factory Reconditioned Clipped Head Angled Framing Nailer
The DeWalt D51825R Factory Reconditioned Clipped Head Angled Framing Nailer is designed for power and convenience. The D51825R has been optimized to generate power for even the toughest applications with minimal air consumption. This Angled Framing Nailer can bury nails in standard framing lumber and engineered framing lumber because of its unique, powerful engine design. The D51825R Framing Nailer has an adjustable rafter hook and tool-free adjustable depth for quick and easy changes that are customized to your application. Features: Unique engine design generates power to bury nails in both standard framing lumber and engineered lumber with minimal recoil Tool-free adjustable depth allows for quick and easy depth-of-drive setting Internal driver piston catch allows for a consistent drive each time Trigger lock-off allows trigger to be disabled when not in use Wear guards protect tool and increase durability Integrated adjustable rafter hook allows for increased versatility on the jobsite What's In The Box: DeWalt D51825R Clipped Head Angled Framing Nailer Safety Glasses
DeWalt DC390KR Factory Reconditioned 18-Volt Cordless XRP Circular Saw Kit
The DeWalt DC390KR Factory Reconditioned 18-Volt Cordless XRP Circular Saw Kit uses a 6-1/2-inch carbide tipped blade for 2 times cutting capacity at 90 and 45 degrees. The DeWalt DC390KR has a high strength magnesium shoe and upper guard that provides increased durability. With a 0 to 50-degree bevel capacity, the DeWalt DC390KR provides additional capacity for a multitude of applications. Features: 0 to 50-degree bevel capacity provides additional capacity for a multitude of applications High strength magnesium shoe and upper guard provides increased durability Fan-cooled motor with replaceable brushes for maximum power and durability 3,700 RPM for fast rip cuts and cross cuts What's In The Box: DeWalt DC390KR Factory Reconditioned 18-Volt Cordless XRP Circular Saw One DeWalt DC9096 18-Volt XRP Battery One Hour Charger Kit Box
DeWalt DC410KAR Factory Reconditioned 4-1/2-inch 18-Volt Cordless Cut-Off Tool K
The DeWalt DC410KAR Factory Reconditioned 4-1/2-inch 18-Volt Cordless Cut-Off Tool Kit uses a heavy duty motor that provides 6,500 RPM of power for the toughest grinding and cutting jobs. Using an all metal gear case to help disperse heat better, the Dewalt DC410KAR is built to promote long bearing, gear and motor life. With a 3-position side handle for multiple grip options and better control, the DeWalt DC410KAR is one of the more versatile cordless cut-off tools on the market today. Features: Compact design is great for everything from deburring and cleaning welds to cutting rebar and steel studs Spindle lock allows users to change their wheels quickly and easily Convenient trigger switch with lock-off button for easier gripping What's In The Box: DeWalt DC410KAR Factory Reconditioned 4-1/2-inch 18-Volt Cordless Cut-Off Tool Two 18-Volt XRP NiCad Batteries 3-Position Side Handle One-Hour Charger Type 27 Guard Type 1 Guard Wrench Carrying Bag Blade NOT Included
DeWalt DC490KAR Factory Reconditioned 18-Volt Cordless 18-Gauge Swivel Head Shea
The DeWalt DC490KAR Factory Reconditioned Heavy-Duty 18V Cordless 18 Gauge Swivel Head and Shear Kit is powered by a high-performance 18V motor with fan cooling and replaceable brushes. Its blades cut 0 to 2300 SPM and remove a 7/32 metal strip, which continuously curls out of the cutting area. The head can swivel 360º for maximum versatility, control and comfort. Features: Head swivels 360° which allows user to access tight quarters while maintaining comfort Cuts 7/32" strip which continuously curls out of the cutting area providing consistent and accurate cuts Cordless tool allows user to take the tool to the work piece What's In The Box: 1 hour charger Two 18V XRP™ batteries Blade Wrench Kit Box
DeWalt DC530KAR Factory Reconditioned 18-Volt XRP Cordless Pencil Vibrator Kit
The DeWalt DC530KAR Factory Reconditioned Heavy-Duty Cordless Pencil Vibrator Kit is a full-power 1-1/8 pencil vibrator with the convenience of the DEWALT cordless 18-volt battery system. The pencil vibrator is ideal for small-scale reinforced concrete applications such as post-tension home slab perimeters, formwork, small-scale concrete street repairs, footers, insulated concrete forms or any application where proper concrete consolidation is critical. It has a 4 long flexible shaft for easy use and long reach. The 1-1/8 vibrator maintains 14,000 vibrations per minute under load for maximum consolidation efficiency. Features: 1-1/8-Inch diameter vibrator delivers maximum consolidation power 4 foot long flexible shaft for easy use and long reach 14,000 VPM (under load) delivers maximum consolidation efficiency What's In the Box: DeWalt DC530KAR Factory Reconditioned 18-Volt XRP Cordless Pencil Vibrator 2 18-Volt XRP Extended Runtime Battery Packs 1 Hour Charger Carrying Bag
DeWalt DC668KAR Factory Reconditioned 18-Volt Cordless Screwdriver Kit
The DeWalt DC668KAR Factory Reconditioned 18-Volt Cordless Screwdriver Kit is an industrial-grade cordless screwdriver that’s specifically designed to meet the demands of professional metalworkers, steel-frame carpenters, metal fabricators, and HVAC contractors. Features: VERSA-CLUTCH torque adjustment system to dial the proper torque needed to efficiently drive fasteners without stripping or breaking fastener 0 - 9,000 / 0 - 2,700 RPM for better fastener control in various material thickness XRP extended run-time batteries provide long run-time and battery life Tool designed for steel fastening applications that is ideal for use in 12 - 28 gauge CRS What's In the Box: DeWalt DC668KAR Factory Reconditioned 18-Volt Cordless Screwdriver Kit (2) 18V XRP Batteries 1-Hour Charger #2 Phillips Screwdriver Bit 5/16-Inch Nut Runner Kit Box
DeWalt DC720KAR Factory Reconditioned 18-Volt Cordless Drill Driver Kit
The DeWalt DC720KAR Factory Reconditioned DC720KA 1/2-Inch Compact Drill/Driver Kit provides users with superior ergonomics, better performance and enhanced durability. The DeWalt DC720KAR offers end-users a dual-speed range of 0-500 and 0-1700 respectively, all packed into 4.8 pounds of compact weight and size. In addition, the DeWalt DC720KAR has new components including a frameless motor that delivers 410 unit watts of power and all metal planetary gears for enhanced durability. Features: High performance frameless motor delivers maximum power of 410 unit watts out Dual speed range 0-500/0-1,700 RPM delivers optimal performance LED worklight provides increased visibility in confined spaces Lightweight design (4.8 pounds) minimizes user fatigue Compact size allows users to fit into tight spaces 1/2-inch ratcheting chuck reduces bit slippage What's In The Box: DeWalt DC720KAR Cordless 1/2-Inch Compact Drill/Driver Two 18-Volt Batteries One-Hour Charger Heavy-Duty Kit Box
DeWalt DC720KBR Factory Reconditioned 18-Volt Cordless 1/2-inch Drill Driver - B
The DeWalt DC720KBR Factory Reconditioned 1/2-Inch Compact Drill/Driver Bare Tool with Case provides users with superior ergonomics, better performance and enhanced durability. The DeWalt DC720KBR offers end-users a dual-speed range of 0-500 and 0-1700 RPM respectively, all packed into 4.8 pounds of compact weight and size. In addition, the DeWalt DC720KBR has new components including a frameless motor that delivers 410 unit watts of power and all metal planetary gears for enhanced durability. Built-in features include a LED light, 1/2-inch single sleeve ratcheting chuck to reduce bit slippage and onboard bit storage. Features: Compact size allows users to fit into tight spaces Lightweight design (4.8 pounds) minimizes user fatigue 1/2-inch ratcheting chuck reduces bit slippage Dual speed range 0-500/0-1,700 RPM delivers optimal performance High performance frameless motor delivers maximum power of 410 unit watts out LED worklight provides increased visibility in confined spaces What's In The Box: DeWalt DC720R Cordless 1/2-Inch Compact Drill/Driver Carrying Case Battery and Charger NOT Included
DeWalt DC725KAR Factory Reconditioned 18-Volt Cordless Compact Hammer Drill/Driv
The DeWalt DC725KAR Factory Reconditioned DC725KA 18-Volt Cordless Compact Hammer Drill/Driver provides users with superior ergonomics, better performance and enhanced durability. The DC725KAR superior ergonomics include less weight 4.9 lbs and shorter length 8.7. In order to provide better performance the DC725KAR offers end-users increased speed and maximum power. In addition, the DC725KA has new components including a frameless motor and all metal planetary gears for enhanced durability. Features: Dual speed range 0-500/0-1,700 rpm 0-8,500/0-29,000 bpm delivers optimal performance High performance frameless motor delivers maximum power of 410 unit watts out LED worklight provides increased visibility in confined spaces 1/2-inch single sleeve ratcheting chuck reduces bit slippage Lightweight design of 4.9 lbs.minimizes user fatigue Compact size allows users to fit into tight spaces What's In the Box: DeWalt DC725KAR 18-Volt Cordless Hammer Drill Kit Two 18-Volt Batteries One Hour Charger Kit Box
