CementWire
Festool 564397 T18 Li 3.0 Cordless Drill Set
The Festool 564397 is a T18 Li 3.0 Cordless Drill Set. Imagine a drill that does the thinking and beeps when the desired torque setting is reached while driving screws. It also beeps when it is time to charge the battery and when it is overloaded, and automatically senses whether the battery is Nickel or Lithium. Imagine this drill being a multifunction tool that at one minute is running a 1-3/8-Inch auger bit, then chasing a screw around a corner or up against a wall and even to a prescribed depth. Never again lose a favorite clutch setting thanks to the independent switch for drilling and driving modes. All of this and more is built into the new T+3 drills from Festool. With the revolutionary EC-TEC brushless motor, Festool's rugged T-Drills can easily power through a million screws or more with minimal wear. A sophisticated internal design is matched by exceptional ergonomics and a tough as nails casing that's built to withstand long, hard days on the job. The incomparable FastFix system is supported by keyless, eccentric, depth stop, right angle and Centrotec system chucks, eliminating the expense of five or more specialized tools, while saving time and wasted material. Features: Lithium-Ion battery technology with battery cells that are carefully tested and selected to find matched sets to enhance cell balancing, ensuring equal charge and discharge cycles to prolong battery life and efficiency FastFix interchangeable chucks quickly and easily swap between any of the five chucks for the C-Series: the Centrotec chuck, keyless drill chuck, right angle chuck, eccentric chuck and depth stop chuck without any tools Brushless motors offer significant advantages over brushed motors, including higher efficiency and reliability, reduced noise, longer service life and they are as much as 39% more powerful Comfortable ergonomics to enhance comfort and reduce fatigue Battery fuel gauge lets you know when the battery is getting low Integrated belt clip can be moved to either side of the drill for convenience in keeping the drill close at hand Onboard bit stowage keeps bits close at hand with the use of a magnet High-intensity LED light allows for applications in low-light areas What's In the Box: Festool 564397 T18 Li 3.0 Cordless Drill Set (2) Li-Ion 18V Battery Packs Charger Keyless Drill Chuck Centrotec Chuck Right Angle Chuck Eccentric Chuck Centrotec Starter Set SYS 1 T-Loc Systainer
Related Products
Hitachi KC18DG6L 18-Volt Cordless Lithium Ion 6-piece Combo Kit
The Hitachi KC18DG6L 18-Volt Cordless Lithium Ion 6-piece Combo Kit is the best way to get all of your favorite Hitachi tools together in one kit. Including six of the most popular Hitachi tools from the cordless circular saw to the cordless angle grinder, the Hitachi KC18DG6L is sure to have the tool that you need for your next project. The majority of the tools in the Hitachi KC18DG6L use externally accessible brushes for minimal downtime. Using the Hitachi 3.0 Ah Lithium Ion HXP batteries, the Hitachi KC18DG6L batteries offer three times the life at half the weight of NiCad batteries while being backwards compatible with all Hitachi 18-Volt DVF3 and DMR Tools. Features: Hitachi DV18DL 18-Volt Cordless Hammerdrill provides a class leading 570 inch-pounds of torque to power through the toughest jobs Unique 2-step speed switch lets the user select from 4 speed settings (0-200/400/900/1800 RPM) for ultimate control Externally accessible carbon brush for quick and easy maintenance Compact and lightweight at only 9.95-inch in length and 4.9 lbs Integrated LED work light Hitachi CR18DL 18-Volt Cordless Reciprocating Saw is constructed with a triple seal design to protect from dust, debris and water waster generated during use Ergonomic shape and slip/heat resistant grip for comfortable operation over extended periods of time Tool-less blade changing system for quick replacements and reduced downtime Fan cooled motor for optimum speed and added durability Replaceable carbon brushes for longer tool life Hitachi C18DL 18-Volt Cordless Circular Saw features a left mounted blade for a clear line of sight and accurate cutting Soft elastomer grip for improved comfort and reduced fatigue Fan cooled motor for longer run times and maximum power Built-in spotlight for improved visibility of cut line Electric brake for increased safety Hitachi WH18DL 18-Volt Cordless Impact Driver uses a class leading torque of 1,330 inch-pounds to power through the toughest jobs with ease Cool Flow system provides a steady stream of air to the motor, allowing the impact to run longer, minimizing the risk of burnout Industrial grade, two-piece motor with heavy gauge copper coils that make it the most powerful and long lasting 5-position belt hook, convenient for in between use, features an integrated LED work light to illuminate dark work spaces Compact and lightweight at only 6-3/8" in length and 3.5 lbs for maneuverability Hitachi G18DL 18-Volt Cordless Angle Grinder uses a slim body design along with a high torque motor to power through tough cutting and grinding applications Slide switch with quick off feature to immediately shut tool down for added safety and spindle lock for quick and easy wheel changes Lightweight and compact design for maneuverability, especially in overhead applications Removable side handle improves comfort and control Safety reset to prevent accidental sta
Paslode 900420 IM325CT Cordless Angled Framing Nailer
The Paslode IM325CT 900420 Cordless Angled Framing Nailer uses Paslode's Impulse Technology, a patented fuel plus battery system which has resulted in compact, lightweight tools that also offer exceptional power and performance with minimal set-up so you can save time and money on the jobsite. This light nailer packs a hefty punch for only weighing 7.4-Pounds. It's able to drive 2-Inch to 3-1/4-Inch fasteners with ease into the hardest of woods. Tight spots and corners are no problem for the angled design of the Paslode IM325CT. You can also adjust the depth of drive without tools, saving you more time. Using this tool in altitudes higher than 5,000 feet or temperatures below 19° F is not recommended. The 219247 High-Altitude Blue Metering Valve does not work with this tools red fuel cell and should not be used. Features: Cordless mobility eliminates hoses and compressors to drag around, saving you time and allowing you to work anywhere with less mess and clutter Compact design allows you to easily work in cramped spaces Heavy duty design stands up to tough jobsite conditions Tool-free depth of drive for quick and easy adjustments Drives 2-Inch to 3-1/4-Inch nails to tackle any framing job Lightweight and well balanced for increased productivity and reduced fatigue during extended usage Nail lockout prevents blank firing, eliminating wood damage Dual position rafter/belt hook What's In The Box: Paslode 900420 IM325CT Cordless Angled Framing Nailer Rechargeable 6-Volt Oval Battery Two Hour Battery Charger Safety Glasses 5/32-Inch Hex Wrench Carrying Case
DeWalt DW960K-2R Factory Reconditioned 18-Volt Cordless Right Angle Drill Driver
The DeWalt DW960K-2R Factory Reconditioned 18-Volt Cordless 3/8-Inch Right Angle Drill Driver Kit has two versatile speed ranges for a wide variety of applications. The DW960K-2R has a multi-grip trigger that is comfortable and convenient, giving you ultimate control in forward and reverse operations. Features: Multi-grip trigger provides comfort and convenience, allowing the user to get into tighter spaces while still having access to the trigger Variable speed and reversing gives the user the ability to control speed for greater accuracy, and the convenience of reverse Two speed ranges 0-500/0-1,500 RPM for increased user flexibility providing a wide range of applications 320 unit watts out of maximum power for heavy-duty applications such as turning large bits and fasteners Durable, right angle transmission with sealed ball bearing for a longer tool life What's In The Box: DeWalt DW960K-2R Cordless 3/8-Inch Right Angle Drill Driver Two 18-Volt Batteries One-Hour Charger Heavy-Dity Kit Box
Hitachi NR90GC Factory Reconditioned Cordless Gas Clipped Head Framing Nailer
The Hitachi NR90GC Factory Reconditioned Cordless Gas Clipped Head Framing Nailer provides you with the power of the traditional pnuematic nailers in a convenient cordless package. Using a fuel cell and rechargeable battery, the Hitachi NR90GC has a compact and lightweight body that is great for use in tight areas like crawl spaces and ceilings. Shooting nails from 2-inch to 3-1/2-inch in length, the Hitachi NR90GC is great for framing, sub-flooring, fencing and many more tasks. Features: Adjustable depth of drive nose piece that guarantees accurate fastener placement E-Z view magazine that lets you tell at a glance when you're running low on nails Fires 1,200 nails per fuel rod and 4,000 nails per battery charge Heavy-duty construction with a double-lock fuel compartment Gas-powered cordless framing nailer with a 7.2-volt battery What's In The Box: One 7.2-Volt Battery 1-Hour Charger Carrying Case Fuel Cell NOT Included
Makita LXT218 Factory Reconditioned 18-Volt LXT Cordless 2-Piece Combo Kit
Makita LXT218R Factory Reconditioned 18-Volt LXT 2 Piece Cordless Combo Kit Features: * 2-Speed 1/2-inch Hammer Driver-Drill (0-400 / 0-1,700 RPM) with Makita-built 4-pole motor delivers 560 in.lbs. of Max. Torque and weighs only 4.9-pounds * Variable speed Impact Driver (0-2,300 RPM) provides 1,330 inch-pounds of Max. Torque in a compact design and weighs only 3.4-pounds * LXT Lithium-Ion battery and optimum charging system produces 430% total lifetime work with 2.5x more cycles * Makita Lithium-Ion battery provides longer run time, 5x lower self-discharge (for use any time) and 16 firm-holding contact terminals (for constant high power) * 30-Minute Rapid Optimum Charger communicates with the battery's built-in chip throughout the charging process to optimize battery life by actively controlling current, voltage and temperature * 30-Minute Rapid Optimum Charger has a built-in fan to cool the battery which helps produce more lifetime work * The charger earned the ENERGY STAR® label for meeting the strict energy-efficient guidelines set by the US Environmental Protection Agency (EPA) and US Department of Energy (DOE) What's In The Box: * BHP454 1/2-Inch Hammer Driver-Drill * BTD141 Impact Driver * Two 18-Volt LXT Lithium-Ion Batteries * 30-Minute Rapid Optimum Charger * Tool Case
ARROW The X Machine Electric Pro Staple Gun
* Perfect blend of form and function * Powerful 14 amps of surge power * Extra heavy duty professional quality * Drives BN1810 nails and 6 sizes of T50 staples * Well balanced ergonomic comfort and styling * Includes case to easily store your tool * Steel channel for trouble free use * Visual refill window
Hitachi WH10DCL 10.8-Volt Cordless Lithium Ion Micro Right Angle Impact Driver
The Hitachi WH10DCL 10.8-Volt Cordless Lithium Ion Micro Right Angle Impact Driver is impressively compact and lightweight. At only 2.2 pounds, the Hitachi WH10DCL is going to be easy to use and will keep fatigue at a minimum. Features: 265 Inch-Pounds of turning torque to easily handle a wide range of drilling, driving and fastening applications Angled low-profile head allows the tool to fit into hard to reach areas with ease Battery charge indicator light warns the user when run-time is low Quick change 1/4" hex chuck for simple bit replacements LED light effectively illuminates dim work areas What's In The Box: Hitachi WH10DCL 10.8-Volt Cordless Lithium Ion Micro Right Angle Impact Driver Two 1.5Ah Lithium Ion Batteries Quick Charger Carrying Case
DeWalt DCK491L2 20-Volt Max Lithium-Ion Cordless 4-Tool Combo Kit
Features: DCD985 20V Max hammerdrill with patented 3-speed all-metal transmission and 1/2-inch self-tightening chuck delivers 535 units watts out of maximum performance, faster application speed and superior bit retention DCS381 20V Max reciprocating saw with keyless blade clamp allows for quick blade change without touching blade or reciprocating shaft DCS393 20V Max circular saw with 6-1/2-inch carbide blade can cut 2x4' at a 45-degree angle in a single pass DCL040 20V Max LED work light delivers 110 lumens of light output What's In The Box: DeWalt DCD985 20-Volt Max Cordless Hammer Drill Driver DeWalt DCS381 20-Volt Max Cordless Reciprocating Saw DeWalt DCS393 20-Volt Max Cordless Circular Saw DeWalt DCL040 20-Volt Max Cordless LED Work Light Two 20-Volt Max Lithium-Ion 3.0Ah Battery Packs Fast Charger 360-Degree Side Handle Carbide-Tipped Blade Contractor Bag
DeWalt DCK470L 18-Volt Cordless 4-Tool Combo Kit
The DeWalt DCK470L 18-Volt Cordless 4-Tool Combo Kit brings the tools that you see on the jobsite everyday into one convienient combo kit. From the DC927 Hammer Drill Driver to the DC385 reciprocating saw, you will find that the DeWalt DCK470L has the tools to handle most jobs on the site. Due to customer demand, DeWalt is including the new Nano XRP Lithium Ion batteries in the DeWalt DCK470L 4-Tool Combo Kit. Features: DeWalt DW919 18-Volt Cordless Flexible Floodlight uses a flexible neck that allows for hands-free operation, allowing the light to be projected in any direction whether it is standing on its base or wrapped around a pipe Lockable head clip offers versatility and convenience of a lantern Wide-angle beam to maximize light over a specific work area Extra-bright Xenon bulb maximizes brightness of the beam DeWalt DC927 18-Volt Cordless Hammer Drill / Driver uses a patented 3-speed, all-metal transmission that helps to match the tools speed to the application NANO battery technology gives high performance with longer run-time and battery life than standard 18-volt systems 1/2-Inch chuck that tightens during work for impressive bit-gripping torque to reduce bit slippage and fall out 22 clutch settings for increased control in fastening applications DeWalt DC385 18-Volt Cordless Reciprocating Saw provides the user with a 1-1/8-inch stroke length and up to 3,000 strokes per minute for faster cuts 4-position blade clamp allows for flush cutting and increased versatility Keyless lever-action blade clamp for quick and easy blade changes Variable speed with trigger lock for increased blade control DeWalt DC390 18-Volt Cordless Circular Saw provides 3,700 RPM for fast rip cuts and cross cuts while the 6-1/2-inch blade is able to handle up to twice the cutting capacity at 90 and 45 degrees High strength magnesium shoe and upper guard provides increased durability for long-term cut accuracy 0 to 50 degree bevel capacity provides additional capacity for a multitude of applications Fan-cooled motor with replaceable brushes for maximum power and durability What's In The Box: Two DC9180 Nano XRP Lithium Ion Battery Packs DC927 18V Cordless XRP Hammer Drill / Driver DC9310 Multi Chemistry Charger DW919 Flexible FloodLight DC385 Reciprocating Saw DC390 Circular Saw Contractor Bag
Makita BUB182Z 18-Volt Cordless Blower - Bare Tool
The Makita BUB182Z is a Li-Ion 18-Volt Cordless Blower (battery NOT included). This compact yet powerful cordless blower has three speeds: Low (75 minute run-time); Medium (25 min.); and High (12 min.) when using the full-size BL1830 3.0Ah Lithium-Ion battery (sold separately right here at Tool King). The BUB182Z will also run on Makita's Compact 18V Lithium-Ion battery (1.5Ah, #BL1815 - sold separately at Tool King). This versatile cordless Makita blower is built for maintenance professionals, repairmen, remodelers, electricians, cabinet installers, woodworkers, and any general contractor seeking a cordless blower with excellent power-to-weight ratio and longer battery run time. Features: Makita-built variable 3-speed motor produces a maximum air velocity of 179 MPH Compact design at only 20-3/4 inches long and weighs only 3.9 lbs. for reduced operator fatigue Soft grip handle provides increased comfort on the job Makita LXT Lithium-Ion battery and Energy Star rated 30-Minute Rapid Optimum Charger produces 430% total lifetime work with 2.5X more cycles What's In the Box: Makita BUB182Z 18-Volt Cordless Blower Tool Only
Makita BSS611Z 18-Volt 6-1/2 Inch LXT Cordless Circular Saw - Bare Tool
The Makita BSS611Z is an 18-Volt 6-1/2-Inch LXTLithium-Ion Cordless Circular Saw. This saw does not include a battery or charger. Features: Makita-built D35 high-torque motor delivers maximum power for cutting 2 times the material at 45 degrees with 50 degrees maximum capacity Compact design at only 13-5/8 inches in length and weighs only 6.9 pounds (with battery, not included) for less operator fatigue Ergonomic shape fits like a glove with even pressure and easy control Heavy gauge, precision machined base ensures smooth, accurate cutting and added durability Two-piece armature and field along with externally accessible brushes for serviceability and longer motor life. What's In The Box: Makita BSS611Z 18-Volt 6-1/2-Inch LXT Lithium-Ion Cordless Circular Saw Battery and Charger NOT Included
DeWalt DCF895L2 20-Volt Max Cordless Lithium Ion Brushless 1/4-inch Impact Drive
The DeWalt DCF895L2 20-Volt Max Cordless Lithium Ion Brushless 1/4-inch Impact Driver Kit uses a brushless motor for minimal upkeep and maximum runtime. The DeWalt DCF895L2 uses a three-speed design that allows users to dial in specific torque range for the task at hand while the compact design allows the impact driver to fit where others do not. Using three LEDs that circle and illuminate the chuck, the DeWalt DCF895L2 is also great for low light areas. Features: Push button chuck allows for one handed accessory changes Compact and lightweight design fits into tight areas with ease 3-speed design allows application specific control Three LEDs that circle and illuminate the chuck What's In The Box: DeWalt DCF895L2 20-Volt Max Cordless Lithium Ion Brushless 1/4-inch Impact Driver Two 3.0Ah 20-Volt Max Lithium Ion Battery Packs 30 Minute Fast Charger Accessory Storage Belt Hook Kitbox
DeWalt DCD980L2 20-Volt Max Lithium-Ion Cordless Drill Driver Kit with 3.0 Ah Ba
Features: DEWALT 20V Max Lithium Ion batteries offer longer tool runtime & enhanced durability Patented 3-speed all-metal transmission matches the tool to task for fastest application speed and improved run time Heavy-duty 1/2" metal ratcheting chuck with carbide inserts provides superior bit gripping strength LED light with 20 second delay after trigger release High power, high efficiency motor delivers 535 unit watts out of max power for superior performance in all drilling and fastening applications What's In The Box: DeWalt DCD980L2 20-Volt Max Lithium-Ion Cordless Drill Driver Two 20-Volt Max Lithium-Ion Batteries One-Hour Charger 360-Degree Side Handle Clear-Top Premium Kit Box
GREAT STATES 12” Cordless Grass Trimmer
* Cordless grass trimmer * Rubber over molded handles * Adjustable auxiliary handle * Flip down edge guard * Lock off switch * Rotating upper handle * Adjustable handle telescopic * Semi auto feed * Energy star charger,, 3H * 8500 rpm * 0.065” line * 12” cut
FREE SHIPPING — Makita Hybrid Cordless Impact Driver — Tool Only, 18 Volt, 1/4in. Hex Shank, Model# BTP140Z
The Makita Hybrid Cordless Impact Driver gives you four functions: impact, hammer, driver and drill in one tool for all trades. Makita-built 4-pole motor delivers 1240 in.-lbs. of maximum impact torque. Variable 2-speed transmission can handle a wide range of drilling, driving and fastening applications. LXT lithium-ion battery and rapid optimum charger (both sold separately) produce 430% total lifetime work with 3X more cycles! SAVE MONEY by replacing or adding specific tools that work with the Makita LXT Lithium-Ion battery and charger you already own. The Makita 18V bare tool system lets you choose the tool you need to get the job done — without buying a complete kit. Add a Makita bare tool to your 18 Volt cordless system today. 4-function tool Impact, hammer, driver and drill Drill mode: Two-speed gearcase (0–700 and 0–2300 RPM) Impact mode: 0–3200 IPM Hammerdrill mode: 0–27,600 BPM Convenient 1/4in. hex chuck for quick bit changes Compact design at only 7 3/8in. long and weighs only 4.1 lbs. for reduced operator fatigue Built-in LED light illuminates work area Ergonomic shape fits like a glove with even pressure and easy control Soft grip handle provides increased comfort on the job Tool only; battery and charger sold separately
DeWalt DW908R Factory Reconditioned 18-Volt Cordless Pivoting Head Flashlight -
The DeWalt DW908R Factory Reconditioned 18-Volt Cordless Pivoting Head Flashlight has an extremely lightweight and compact design that makes it perfect for use anywhere. The DeWalt DW908R comes with a bright Xenon bulb that maximizes brightness for increased visibility in dimly lit areas. This DeWalt DW908R also features a 90-degree pivoting head that lets you project light in the direction that best meets your needs. Features: DeWalt's 18-volt battery, sold separately, will power light for up to 3 hours Wide-angle beam maximizes light over a specific work area What's In The Box: DeWalt DW908R Factory Reconditioned 18-Volt Cordless Pivoting Head Flashlight Battery and Charger NOT Included
Makita LCT309W 12-Volt Max Cordless Lithium Ion Combo Kit - 3-Piece
The Makita LCT309W 12-Volt Max Cordless Lithium Ion Combo Kit - 3-Piece is a complete kit that brings the favorites of Makita's line up together in one kit. The Makita LCT309W features a drill driver, an impact wrench and a flashlight that all run on Makita's 12-Volt Max Lithium Ion battery. The LCT309W uses a charger that has the Energy Star label that shows the charger meets the strict energy-efficient guidelines set by the US Environmental Protection Agency (EPA) and US Department of Energy (DOE). Features: Makita WT01W 12-Volt Max Cordless 3/8-inch Impact Wrench has a Makita-built motor that delivers 1,000 inch-pounds of Max Torque in an ultra compact size Ultra compact design at only 6-3/8-inch long and weighs only 2.1 pounds for reduced operator fatigue Convenient 3/8-inch square drive for quick socket changes Variable speed for a wide range of fastening applications Built-in L.E.D. light illuminates the work area Makita FD02W 12-Volt Max Cordless 3/8-inch Drill Driver uses a Makita-built motor to deliver 200 inch-pounds of Max Torque and 120 inch-pounds of PTI torque in an ultra compact size Ultra compact design at 7-7/16-inch long and weighs only 2.2 pounds for reduced operator fatigue Variable 2-speed design covers a wide range of drilling and driving applications Built-in L.E.D. light illuminates the work area Makita LM01W 12-Volt Max Cordless LED Flashlight is able to run up to 9 hours per charge Compact design at only 4-3/4-inch long and weighs only 0.55 lbs. with battery Soft grip handle provides increased comfort Built-in belt clip for added convenience What's In The Box: Makita LCT309W 12-Volt Max Cordless Lithium Ion Combo Kit Makita WT01W 12-Volt Max Cordless 3/8-inch Impact Wrench Makita FD02W 12-Volt Max Cordless 3/8-inch Drill Driver Makita LM01W 12-Volt Max Cordless LED Flashlight Two 12-Volt Max Lithium Ion Batteries Battery Charger Tool Case
Rockwell RC2842K2 18-Volt Cordless Reciprocating Saw Kit
The Rockwell RC2842K2 Shop Series 18-Volt Cordless Reciprocating Saw is lightweight yet powerful, designed to handle everything from heavy-duty demolition jobs to light duty pruning. The user-friendly RC2842K Reciprocating Saw features a variable speed motor, adjustable front shoe and the Rockwell's patented 30-second blade change system. Receive FREE replacement batteries for life from Rockwell! Click here for details on the Battery for Life Program (PDF file - requires Adobe Acrobat to view/print) and here to register your Rockwell products. Features: Tool-free blade change system for fast and easy blade changes, reducing downtime Variable speed, two-finger trigger provides better control for cutting of various materials Ergonomic contoured grip design with soft-grip for added user comfort Pivoting foot plate provides larger surface contact for added stability and control Lock-off safety switch helps to avoid accidental start ups What's In The Box: Rockwell RC2842K2 Shop Series 18-Volt Cordless NiCad Reciprocating Saw Two 18-Volt NiCad PowerTank Batteries One-Hour Charger Bi-Metal Saw Blade
Makita BHR241Z 18-Volt Cordless LXT Lithium-Ion 7/8-inch SDS-Plus Rotary Hammer
The Makita BHR241Z 18-Volt Cordless LXT Lithium-Ion 7/8-inch SDS-Plus Rotary Hammer - Bare Tool is a compact rotary hammer with a compact rotary hammer weight. The reduced weight of the BHR241Z will lessen fatigue on the user during prolonged use. Features: 30-Minute Rapid Optimum Charger has a built-in fan to cool the battery to produce more lifetime work 3-Mode operation for rotation only, hammering with rotation or hammering only Built-in clutch reduces gear damage by disengaging gears if bit binds Large 2-finger variable speed trigger for added convenience Chisel rotates 360 degrees with 40 different positions One-touch sliding chuck for quick bit changes What's In The Box: Makita BHR241Z 18-Volt Cordless LXT Lithium-Ion 7/8-inch SDS-Plus Rotary Hammer - Bare Tool
FREE SHIPPING — Milwaukee M18 Cordless Right Angle Drill Kit — M18 XC Lithium-Ion Battery, Charger and Case, Model# 2615-21
The Milwaukee M18 Cordless Right Angle Drill combines a 3.75in. total head length with an integrated electronic clutch to create the most compact 18V right angle drill driver in the industry. A 3/8in. single sleeve keyless chuck, extended multiposition trigger and up to 125 ft.-lbs of torque provide versatility, ease of use and power that is unmatched. Max. Torque (in.-lbs.): 125, Volts: 18, Speed - No Load (RPM): 0–1,500, Chuck Size (in.): 3/8, Keyless Chuck: Yes, Clutch Settings: Yes, 11 + drill, Reversible: Yes, Variable Speed: Yes, Side Handle: No, Battery Amp/Hour: 3.0, Battery Included: Yes, Charger Included: Yes, Case Included: Yes, Tool Length (in.): 11.25, Tool Weight (lbs.): 4.25 Compact drill has 3.75in.L head for working in tight spaces Delivers 125 in.-lbs. of torque 3/8in. single sleeve ratcheting chuck Variable speed, reversible; 0–1500 RPM 11+1 electronic clutch settings Built-in LED lights Extended multiposition handle M18 XC lithium-ion battery for longer run times and increased performance
DeWalt DW904 12-Volt Cordless Pivoting Head Flashlight
The DeWalt DW904 is a Heavy-Duty 12V Cordless Pivoting Head Flashlight. The flashlight is powered by the DEWALT 12V system of battery packs. The flashlight has spare extra-bright Xenon bulb inside lens cover which allows user to always have a working light. Lightweight, compact design makes the flashlight durable and portable. Features: Wide-angle beam maximizes light over a specific work area Pivoting head rotates 90° which allows light to be projected in any direction Extra-bright Xenon bulb maximizes brightness of the beam Compact design makes the flashlight durable and portable What's In The Box: DeWalt DW904 Heavy-Duty 12V Cordless Pivoting Head Flashlight
Makita LXT601 18-Volt LXT Cordless 6-Piece Combo Kit
The Makita LXT601 18-Volt LXT Lithium-Ion 6-Piece Cordless Tool Combo Kit includes a Hammer Drill/Driver, Circular Saw, Recip Saw, Impact Driver, Cordless Angle Driver and Flashlight with two batteries and a 30-Minute Rapid Charger. This large 6-Piece Combo Kit is easy to transport in the included rolling tool bag with telescoping handle. Features: BHP452 2-Speed 1/2-inch Hammer Driver-Drill with Makita-built 4-pole motor produces speeds of 0-400 RPM (low) and 0-1,500 RPM (high), delivering 450 inch-pounds of Max Torque while weighing only 4.2 pounds BTD141 Variable speed Impact Driver produces 0-2,300 RPM delivering 1,330 inch-pounds of Max Torque in a compact design while weighing only 3.4 pounds BJR182 Reciprocating Saw weighs only 7.7 pounds and provides 0-2,900 SPM and features tool-less blade changes & shoe adjustments BSS611 6-1/2-inch Circular Saw delivers 3,700 RPM for faster, more efficient cutting and ripping through wood while weighing only 6.9 pounds BGA452 4-1/2-inch Cut-Off/Angle Grinder weighs only 5.3 pounds and produces an impressive 10,000 RPM BML185 4-Position Flashlight uses a bright Xenon bulb and can run for over 4 hours per battery charge Makita's LXT Lithium-Ion batteries provide longer run times, 5 times lower self-discharge and 16 firm-holding contact terminals 30-Minute Rapid Optimum Charger optimizes battery life by actively controlling current, voltage and temperature throughout the charging process and features a built-in fan to cool the battery, extending the life of the battery What's In The Box: Makita BHP452 Cordless 2-Speed 1/2-inch Hammer Driver-Drill Makita BTD141 Cordless Variable speed Impact Driver Makita BJR182 Cordless Reciprocating Saw Makita BSS611 Cordless 6-1/2-inch Circular Saw Makita BGA452 Cordless 4-1/2-inch Cut-Off/Angle Grinder Makita BML185 Cordless 4-Position Flashlight Two 18-Volt LXT Lithium-Ion Batteries - BL1830 30-Minute Rapid Optimum Charger - DC18RA Rolling Contractor Bag with Telescoping Handle - 831269-3
DeWalt DC970K-2R Factory Reconditioned 18-Volt Cordless Drill/Driver Kit
The DeWalt DC970K-2R Factory Reconditioned DC970K-2 18-Volt Cordless Drill/Driver Kit is perfect for anyone looking for a compact tool capable of drilling and driving in tight spaces that other tools cannot reach. The DC970K-2R's lightweight design makes it extremely comfortable to use. Despite the compact design, this Drill/Driver makes no sacrifice of power and also features a 1/2-inch single-sleeve keyless ratcheting chuck for convenient and superior bit retention. Features: Compact size fits into the tightest conditions Lightweight design (5.2 pounds) minimizes user fatigue High performance motor delivers maximum power of 380 unit watts out Dual speed range of 0-450/0-1500 RPM delivers optimal performance What's In The Box: DeWalt DC970K-2R 18-Volt Drill/Driver Two 18-Volt Ni-Cad Batteries One-Hour Charger Heavy-Duty Carrying Case
DeWalt DCD920KXR Factory Reconditioned 14.4-Volt Cordless 1/2-inch Drill Driver
The DeWalt DCD920KXR Factory Reconditioned 14.4-Volt Cordless 1/2-Inch Drill/Driver Kit has a patented 3-speed transmission all-metal transmission that lets you tailor the drill to your task. With the 3 speeds of the DCD920KXR allows you to choose the fastest speed for your application, resulting in improves run time. The DCD920KXR is powered by XRP batteries, which further extend the run time of this Drill/Driver and battery life. Features: Heavy-duty 1/2-inch ratcheting chuck helps prevent bits from slipping and falling out LED worklight provides increased visibility in confined spaces High-power, high-efficiency motor delivers 325 unit watts out of max power for superior performance in all drilling and fastening What's In The Box: DeWalt DCD920KXR Cordless 1/2-Inch Drill/Driver Two 14.4-Volt XRP Batteries One-Hour Charger Heavy-Duty Kit Box
DeWalt DC835KA 14.4-Volt Cordless Impact Driver Kit
The DeWalt DC835KA 1/4 Heavy-Duty 14.4 Volt Impact Driver provides a light weight, compact and durable solution for a wide range of light to medium fastening applications. The DC835KA offers exceptionally small size (just 5-3/4 inches front to back) and with the battery weighs only 3.9 pounds. The DC835KA has a durable high-speed motor that delivers 0-2,400 RPM for increased productivity. The DC835KA has frameless motor technology with replaceable brushes for easy serviceability and allows for superior airflow which increases motor durability and extended life. Built-in features of the DC835KA include a bright LED work light and onboard bit storage. The DC835KA features advanced handle ergonomics and is equipped with a textured anti-slip rubber grip for extended user comfort and productivity. Features: Frameless motor with replaceable brushes for extended tool durability and life Compact size and lightweight design allows user to get into tight spaces when performing applications 1,240 inch-pounds of torque to perform a wide range of fastening applications 0-2,400 RPM/0-2,700 IPM for faster application speed Replaceable brushes for increased serviceability Textured ant-slip comfort grip provides maximum comfort and control Durable magnesium gear case and all-metal transmission for extended durability Heavy-duty impact mechanism directs torque to fastener without kickback What's In The Box: DeWalt DC835 Cordless Impact Driver One-Hour Charger Two 14.4-Volt XRP Batteries Heavy-Duty Kit Box
FREE SHIPPING — Milwaukee M12 Cordless Subcompact Driver — 12 Volt, 1/4in., Model# 2401-22
The Milwaukee M12 Screwdriver has the power to drive the majority of common small fasteners and the run time of full-day screw driving without recharging. The compact size allows the users to work in tight places for increased convenience. Features a hex chuck which allows one-handed bit changes. Lithium-ion battery drives over 100 screws on a single charge. Max. Torque (in.-lbs.): 150, Volts: 12, Speed - No Load (RPM): 0–500, Chuck Size (in.): 1/4, Clutch Settings: 14 + 1, Variable Speed: Yes, Battery Amp/Hour: 1.4, Battery Included: Yes, Charger Included: Yes, Case Included: Yes, Tool Length (in.): 7, Tool Weight (lbs.): 2 Built-in LED light Metal gear housing 1/4in. hex chuck allows one-handed bit changes Built-in battery fuel gauge displays remaining run time 12V lithium-ion battery drives 130 3in. screws on one charge Overmold side and grip
Milwaukee 2401-20 M12 12-Volt Cordless Sub-Compact Driver - Bare Tool
The Milwaukee 2401-20 Li-Ion Subcompact Driver. This ultra compact 12-Volt Drill/Driver is an ideal all around tool. It's micro size allows you to maneuver into places unheard of with other cordless drills, and coupled with a 12-Volt Lithium Ion battery (NOT Included) and the driving capabilities of an 18-Volt driver you have the power and versatility needed to finish any job. Features: 25% more power than the competition with 100 in./lbs of Torque 30% more run-time then the competition with the ability to drive up to 130 3-Inch screws Faster than the competition with 0-500 RPM motor speeds Battery level indicator lets you easily see how much battery life is left for your job Metal gear housing ensures greater durability and longer tool life Built in LED light illuminates work area making it easier to see in dark, tight spots The small compact size gives you the freedom to use a power tool in areas not normally accessible by other impact drills and drivers What's In The Box: Milwaukee 2401-20 M12 12-Volt Cordless Sub-Compact Driver - Bare Tool Batteries and Charger are NOT Included
Makita LXT405 18-Volt LXT Cordless 4-Piece Combo Kit
The Makita LXT405 18-Volt LXT 4-Piece Cordless Combo Kit contains a Hammer Drill Driver, Impact Driver, Circular Saw and Flashlight. The LXT405 operates on Lithium-Ion batteries which provide longer run time, 5 times lower self-discharge (for use any time) and 16 firm holding contact terminals (for constant high power). The LXT Lithium-Ion battery and optimum charging system produce 430 percent total lifetime work with 2.5 times more cycles s you don't have to worry about replacing your battery after every big job. The Makita Rapid Optimum Charger communicates with the battery’s built-in chip throughout the charging process to optimize battery life by actively controlling current, voltage and temperature. Features: 1/2-inch Hammer Driver-Drill has a new 4-pole motor for 450 inch-pounds of torque and weighs only 3.9 pounds Impact Driver is 40 percent more compact, 1,330 inch-pounds of torque with 0-3,200 IPM and is 3.3 pounds 6-1/2-inch Circular Saw has a D35 high torque motor that delivers maximum power for cutting 2 times the material at 45 degrees and is only 6.9 pounds 4-Position Flashlight with Xenon bulbs runs 4.3 hours 3-year warranty on tools and 1-year warranty on battery & charger What's In The Box: Makita BHP452 Cordless Hammer Driver Drill Makita BTD141 Cordless Impact Driver Makita BSS611 Cordless Circular Saw Makita BML185 Cordless Flashlight Two 18-Volt LXT Lithium- Ion Batteries - BL1830 30-Minute Rapid Optimum Charger - DC18RA Contractor Bag - 831284-7
Dremel 7700-1/15 7.2-Volt Cordless Tool with 1 Attachment & 15 Accessories
Dremel 7700-1/15 7.2 Volt Cordless Tool with 1 Attachment & 15 Accessories Features: Two speeds 10,000 and 20,000 rpm to match the proper speed required Removable battery pack lets you use additional packs for continuous use 3-hour charger with LED light shows proper charging Compact and lightweight for easier handling and less fatigue Includes 15 genuine Dremel accessories What's In The Box: Dremel 7700-1/15 7.2 Volt Cordless Tool 7.2-Volt Battery Pack Three-Hour Charger 675 Lawn Mower and Garden Tool Sharpener Attachment Wrench 191 1/8-Inch High-Speed Cutter 401 Mandrel 402 Mandrel 403 Bristle Brush 407 1/2-Inch Drum Sander 408 1/2-Inch 60-Grit Sanding Band 414 Felt Wheel 420 Heavy-Duty Emery Cut-Off Wheel 421 Polishing Compound 430 1/4-Inch Sanding Drum 540 1-1/4-Inch Cut-Off Wheel 932 Aluminum Oxide Grinding Stone 952 Aluminum Oxide Grinding Stone 8193 5/8-Inch Aluminum Oxide Grinding Stone
FREE SHIPPING — Milwaukee M18 High Performance Drill/Driver — Tool Only, 650in.-lbs. Torque, Model# 2610-20
The Milwaukee M18™ High Performance Drill/Driver delivers revolutionary power, run time and ergonomics. The new Milwaukee 4-Pole Frameless Motor generates a best-in-class 650 in.-lbs. of torque to meet the application rigors of the jobsite. Max. Torque (in.-lbs.): 650, Volts: 18, Speed - No Load (RPM): 0–450/0–1,800, Chuck Size (in.): 1/2, Keyless Chuck: Yes, Clutch Settings: 24, Reversible: Yes, Variable Speed: Yes, Side Handle: Yes, Battery Included: No, Charger Included: No, Case Included: No, Tool Length (in.): 9.25, Tool Weight (lbs.): 3.8 Tool only; battery sold separately Powered by a 18V XC high-capacity LITHIUM-ION battery (not included) Easy-to-use 1/2in. single-sleeve ratcheting metal chuck with carbide jaws for maximum grip Built-in LED light illuminates work surface
