CementWire
Power Tools
DELTA 22-470 24'''' Planer 22-470
The DELTA 22-470 includes 7-1/2 HP, Three Phase motor with magnetic motor starter and automatic reset overload protection, three-knife cutterhead, sectional serrated infeed roll, double bed rolls, polyurethane outfeed rolls, sectional chipbreakers, dust chute, knife-setting gage, wrenchStandard-equipment knife-setting gauge is included for accurately setting the three-knife cutterhead.Hinged side panel access doors make it easy to change feed rate speed from 20 to 30 feet per minute.Sectional serrated steel infeed roller with sectional chip breakers for planing uneven stock.Up-front controls include a handy lever for instantly engaging and disengaging feed rolls and push-button on/off switch.Micro-adjustable bed rollers lever quickly raises and lowers bed rolls.
DELTA 22-451 DC-580 20'''' Planer
The DELTA 22-451 includes single phase, 5 HP motor with magnetic motor starter and automatic reset overload protection, three-knife cutterhead, sectional serrated infeed roll, double bed rollers, polyurethane outfeed roll, sectional chip-breakers, dust chute, knife-setting gauge, wrenchUp-front controls include a handy lever for instantly engaging and disengaging feed rolls and push-button on/off switch.Large precision-ground table contains two adjustable bed rolls for smooth feeding of uneven stock.Large-diameter, micro-adjustable bed roll lever easily raises and lowers bed rollers for quick set-ups. Conveniently placed to the right, a large handwheel with locking knob adjusts table height.Sectional serrated steel infeed roller with sectional chip breakers for planing uneven stock.
DELTA 22-450 DC-580 20'''' Planer
The DELTA 22-450 includes Three Phase, 5 HP motor with magnetic motor starter and automatic reset overload protection, three-knife cutterhead, sectional serrated infeed roll, double bed rollers, polyurethane outfeed roll, sectional chip-breakers, dust chute, knife-setting gauge, wrenchUp-front controls include a handy lever for instantly engaging and disengaging feed rolls and push-button on/off switch.Large precision-ground table contains two adjustable bed rolls for smooth feeding of uneven stock.Large-diameter, micro-adjustable bed roll lever easily raises and lowers bed rollers for quick set-ups. Conveniently placed to the right, a large handwheel with locking knob adjusts table height.Sectional serrated steel infeed roller with sectional chip breakers for planing uneven stock.
DELTA 37-361 DJ 30 12'''' Jointer
The DELTA 37-361 includes 3 HP motor, Single Phase, set of three knives, cutterhead assembly, cutterhead guard, wrenches, rabbeting ledge, tilting fence, push blocks, instruction manualCenter-mounted fence safely encloses the rear of the cutterhead when working to the front of the machine. Rack and pinion movement for smooth, precise adjustment.Infeed and outfeed tables have an easy-to-use lever for raising and lowering table bed.Parallelogram support system allows the table to move up or down in the same arc as the cutterhead, allowing less space between thte table and cutterhead for safer, more efficient cutting, provides less tear-out.Hinged door and removable door panel allow for easy access to the motor and V-belts.
DELTA 37-360 DJ 30 12'''' Jointer
The DELTA 37-360 includes 3 HP motor. Three Phase motor, set of three knives, cutterhead assembly, cutterhead guard, wrenches, rabbeting ledge, tilting fence, push blocks, instruction manualCenter-mounted fence safely encloses the rear of the cutterhead when working to the front of the machine. Rack and pinion movement for smooth, precise adjustment.Infeed and outfeed tables have an easy-to-use lever for raising and lowering table bed.Parallelogram support system allows the table to move up or down in the same arc as the cutterhead, allowing less space between the table and cutterhead for safer, more efficient cutting, provides less tear-out.Hinged door and removable door panel allow for easy access to the motor and V-belts
SolarPod Heartland Solar PV System — 920 Watt (Four 230 Watt Solar Panels), Model# 1002
The SolarPod Heartland 920 Watt solar PV system helps you drastically reduce energy costs at home or your business while helping to protect the environment. This plug-and-play solar PV (photovoltaic) system is constructed entirely of materials made in the U.S.A. Common Usage: Solar photovoltaic, Panel Type: Solar photovoltaic, Solar Panel Wattage: 230, Rated Watts (kW): 0.92, True Sine Wave: Yes, Dimensions L x W (in.): 162 x 54, Thickness (in.): 12 ga. steel, Material Type: Silicon solar photovoltaic panels, Solar Panels Included (qty.): 4, Weather Resistant: Yes, Battery Included: No, grid-tied system only, Batteries (qty.): Not included, Mounting Hardware Included: Yes, galvanized steel, Electrician Required: Yes Prefabricated design makes installation 30–50% faster than conventional rooftop solar PV systems No south-facing roof is necessary — angle is adjustable to maximize seasonal changes Plugs directly into a 240V receptacle and integrates into an existing electrical system (requires hardwire connection) Pure sine wave inverters allow for safely integrating into the electrical grid and powering sensitive electronics, such as computers, stereos, power tools and more System can be expanded with additional SolarPod panels (sold separately) as your energy needs grow Includes four 230 Watt solar panels (920 Watts total), inverters, mounting and footing materials and cables SolarPod plugs series into one breaker 13 1/2ft.L x 4 1/2ft.W UL and CEC approved 25-year limited warranty on panels and inverter; 5-year limited warranty on the mounting and rack system
FREE SHIPPING — Lincoln Electric Ranger 305 G Multiprocess DC Welder/AC Generator Featuring Chopper Technology — 305 Amp DC Welding Output, 9,500 Watt
The Lincoln Ranger® 305 G is a powerful multiprocess stick, TIG, wire and pipe welding, engine-driven welder. It is ready for all day, everyday performance and includes Lincolns Chopper Technology® for superior arc performance. Since it also includes a powerful generator that produces 9500 Watts of continuous power and 10,500 surge watts, it provides the power needed to run power equipment, lights, grinding equipment or other power tools at a jobsite. The Ranger provides excellent DC multiprocess welding for general purpose welding and arc gouging operations, providing an unparalleled 29V for 300 Amp power for stick welding. Lincolns Chopper technology provides easy starts, a smooth, reliable arc, low spatter and excellent bead appearance. The Ranger is powered by a 23 HP Kohler engine. U.S.A. Rated Watts (kW): 9,500, Surge Watts (kW): 10,500, Receptacles (qty.): 3, Circuit Breakers: Yes, Welding Amperage Range: Up to 300, Weldable Metals: Steel, stainless steel, cast iron, Weld Thickness (in.): Up to 5/32 stick electrodes, Duty Cycle: 305 A at 29V, 100%, Clamp Cable Length (ft.): 10, Engine: Kohler, HP: 23, Start Type: Pushbutton, Auto-Idle: Yes, Fuel Capacity (gal.): 12, Dimensions L x W x H (in.): 42.3 x 21.5 x 29.9 Skewed rotor design provides AC power suitable for operating Lincoln inverter power sources CC-Stick mode is optimized for general purpose stick welding using E7018 low hydrogen electrode Downhill pipe welding mode is excellent for cellulosic electrodes, providing fast travel speeds Integrated arc control provides a soft or more forceful digging arc Touch-Start DC TIG® mode lifts tungsten to start arc, with no high frequency required, avoiding contamination in weld Simple controls keep training time to minimum Dual digital output meters allow presetting weld amps
FREE SHIPPING — Lincoln Electric Ranger 250 GXT AC/DC Arc Welder/AC Generator w/Electric Fuel Pump — 250 Amp DC/250 Amp AC Welding Output, 10,000 Watt
Why settle for less, when you can get more? The Ranger GXT has all of the Xtras you need for construction and maintenance work. This Ranger delivers XTra welding performance with 250 amps for AC or DC stick and wire welding. And, it is remote-ready for extended amperage control or AC TIG welding on aluminum with Lincoln’s optional TIG module. The GXT generates XTra power, up to 11,000 watts peak, for lights, grinders and high amperage equipment such as Lincolns Pro-Cut 55 plasma cutter. U.S.A. Rated Watts (kW): 11,000, Surge Watts (kW): 10,000, Receptacles (qty.): Two 120 Volt, 40 A and One 120/240 Volt, 42 Amp, Circuit Breakers: Yes, Welding Amperage Range: 50-250, Duty Cycle: 100% at 250A, 25V, Engine: Kohler OHV Command, HP: 23, Start Type: Electric, Auto-Idle: Idler function switch, Fuel Capacity (gal.): 12, Dimensions L x W x H (in.): 21 1/2 x 42 9/32 x 36 3/16 Totally enclosed case, which ensures engine is fully protected Use as an AC generator for high-capacity needs such as backup generator, powering welders as well as lights and other power tools Low noise unit: 76.4 dBA sound level at 23ft. (7 m), 100.7 dB sound power (Lwa) at rated output Painted roof, case sides and engine doors AC/DC welding output for a broad range of stick electrode types Excellent AC TIG welding with optional TIG Module and either a foot or hand Amptroltm for aluminum and other alloy welding MIG and flux-cored capable (with optional equipment) 6-pin connector and local/remote switch for remote control, so unit is remote ready! Peak for motor starting 10,000 watts continuous power for generator, plasma cutter or inverter welder Includes electric fuel pump, which helps prevent vapor lock Includes oil drain extension for easy oil changes Includes 12 gallon fuel tank for extended run times Electric fuel gauge located on control panel makes it easy to check the fuel level during operation and refueling Rated 125 Volt/250 Amp for AC, DC and CV All outputs rated at 100% duty cycle
SolarPod Solar PV System — 920 Watts, 4 Panels, Model# 1001
This SolarPod Solar PV System drastically reduces energy costs at home or your business while helping to protect the environment. SolarPod is the first plug-and-play solar PV (photovoltaic) system. A pre-fabricated design makes installation 30-50% faster than conventional rooftop solar PV systems. No south-facing roof is necessary — angle is adjustable to maximize seasonal changes. Pure sine wave inverters allow for safely integrating into the electrical grid and powering sensitive electronics, such as computers, stereos, power tools and more. U.S.A. Common Usage: Solar photovoltaic, Panel Type: Solar photovoltaic, Solar Panel Wattage: 920W total (230W each), Rated Watts (kW): 0.92, True Sine Wave: Yes, Dimensions L x W (in.): 13 ft. 6 in. x 4ft.6in., Thickness (in.): 12-ga. steel, Material Type: Silicon and galvanized steel, Solar Panels Included (qty.): 4, Weather Resistant: Yes, Battery Included: No, Mounting Hardware Included: Yes, Electrician Required: Yes Plugs directly into a 240V receptacle and integrates into an existing electrical system (requires hardwire connection) System can be expanded with additional SolarPod panels if desired SolarPod plugs series into one breaker Includes four 230-Watt solar panels (920 Watts total), inverters, mounting and footing materials and cables 13ft. 6in.L x 4ft.6in.W UL and CEC approved 25-year limited warranty on panels and inverter 5-year limited warranty on the mounting and rack system 1-year limited warranty on workmanship Made in the U.S.A.
Delta UNISAW Tablesaw, 5 HP, with 52'' BIESEMEYER Fence System, Model 36-L352 36-L552
The 36-L352 includes 3 HP, 220V, 1 Phase, 60 Hz motor, 52 BIESEMEYER fence and tube, Black precision BIESEMEYER fence and tube, Black precision BIESEMEYER fence body, UNISAW black table board 52 BIESEMEYER fence, Black 2 x 2 x 34-1/4 fence legs, BIESEMEYER standard accessory drawer.Extra shipping charges will apply.Due to the size of this item, a special shipping charge of $150 is required. There will also be an additional $60 charge will if a Lift Gate is required and shipping to a Residential address. If a lift gate is not required, a $45 Residential charge will apply or there is $35 charge for Lift Gate only. When your order is processed, these special shipping charges will be adjusted to your order. The special shipping charges that appear in your shopping cart at checkout may not be correct.
Delta UNISAW Tablesaw, 3 HP, with 52'''' BIESEMEYER Fence System, Model 36-L352
The 36-L352 includes 3 HP, 220V, 1 Phase, 60 Hz motor, 52 BIESEMEYER fence and tube, Black precision BIESEMEYER fence and tube, Black precision BIESEMEYER fence body, UNISAW black table board 52 BIESEMEYER fence, Black 2 x 2 x 34-1/4 fence legs, BIESEMEYER standard accessory drawer.Extra shipping charges will apply.Due to the size of this item, a special shipping charge of $150 is required. There will also be an additional $60 charge will if a Lift Gate is required and shipping to a Residential address. If a lift gate is not required, a $45 Residential charge will apply or there is $35 charge for Lift Gate only. When your order is processed, these special shipping charges will be adjusted to your order. The special shipping charges that appear in your shopping cart at checkout may not be correct.
FREE SHIPPING — Darex Tool/Drill Sharpener, Model# XT3000
The Darex XT3000 creates a wide variety of point styles with fool-proof precision. Sharpens a wide variety of sizes and styles of drills and other tools with ease and accuracy. A patented chuck/cam design allows users with entry-level skills to sharpen split-point bits with precision. U.S.A. Bit Sizes (SAE): 1/8 to 13/16, Bit Sizes (mm): 3–21, Angle Sharpening (deg.): 118 to 150, Cobalt Bits: Yes, Split Point Bits: Yes 115V, 3.2 Amp, 1/4 HP motor 20in. x 20in. x 16in. Comes standard with 2 Borazon wheels for HSS and cobalt drill bits Optional diamond wheels for carbide bits, plus attachments for large bits up to 1 3/16in., counter-sink, brad point, step drill and more sold separately All attachments can be interchanged without tools Model XT3000
Delta UNISAW Tablesaw, 3 HP, with 36'''' BIESEMEYER Fence System, Model 36-L336
The 36-L352 includes 3 HP, 220V, 1 Phase, 60 Hz motor, 52 BIESEMEYER fence and tube, Black precision BIESEMEYER fence and tube, Black precision BIESEMEYER fence body, UNISAW black table board 52 BIESEMEYER fence, Black 2 x 2 x 34-1/4 fence legs, BIESEMEYER standard accessory drawer.Extra shipping charges will apply.Due to the size of this item, a special shipping charge of $150 is required. There will also be an additional $60 charge will if a Lift Gate is required and shipping to a Residential address. If a lift gate is not required, a $45 Residential charge will apply or there is $35 charge for Lift Gate only. When your order is processed, these special shipping charges will be adjusted to your order. The special shipping charges that appear in your shopping cart at checkout may not be correct.
DELTA 31-396 Oscillating Edge Sander with Spindle Sanding Attachment
The DELTA 31-396 includes 3 HP, 220 Volts motor, spindle sanding attachments include: 1-1/2 x 2, 3 diameter, drums with collar inserts, heavy gauge steel fence, miter gauge, allen wrench, hardware, instruction manualPowered by a 3 HP, 220 Volts Single Phase motor.Idler roller can be used for edge sanding of irregular shapes.Quick-release belt tensioning for easier belt changing.Front cast-iron sanding table can be moved up and down, forward and backward.Adjustable head from 0 - 90 with detent stops at 0, 45, 90.Spindle sanding kit with 3 sizes of drums and collars for contour sanding.Graphite sanding platen can tilt from 0 to 90 or any angle in between.
FREE SHIPPING — Electric Eel Sectional Drain Cleaning Machine, Model C
The versatility of this Electric Eel Sectional Drain Cleaning Machine is exceptional. The higher RPM offers better cleaning power for tough stoppages, such as roots and compacted debris. Sectional cables are economical and can be replaced at any time. One-person operation means less time and labor expense. U.S.A. Speed (RPM): 500, HP: 1/2, Cable Size Diameter x L (in. x ft.): (13) 8 ft. sections, Clearing Diameter (in.): 3–10, Clearing Distance (ft.): 200, Power Cord (ft.): 20, Cart: Yes 13 self-feeding 8ft. dual cables (104-ft. total) Fully adjustable safety clutch provides overload protection Rugged, cast aluminum base Fold-down handle for easy transportation and storage Set of 7 cleaning tools Feeding tool for negotiating &Quot;P&Quot; traps Spanner wrench for disconnecting cables and tools
FREE SHIPPING — Electric Eel Drum-Style Electric Drain Cleaner, Model# D-5
This powerful Electric Eel Drain Cleaner combines professional quality and affordability in a continuous cable drum machine. Excellent for interior maintenance and cleaning main lines. High-torque motor powers the rust-resistant polyethylene cable drum, sending the Tri-Max cable into clogged drains to work its way through the toughest stuff. U.S.A. HP: 1/2, Cable Size Diameter x L (in. x ft.): 3/4 x 100, Clearing Diameter (in.): 3–10, Clearing Distance (ft.): 100, Power Cord (ft.): 20, Cart: Yes Power cable feeder Air-operated foot switch Loading wheel Stair climbers 5-position height adjustment on handle Tool connectors Wheel brake Includes 2-ft. flex leader, 7 cleaning tools, spanner wrench, metal tool box and heavy-duty gloves
JET Manual Ferrous Cold Saw, Model# CS-275
The JET manual ferrous cold saw uses a 275mm blade to cut through solid steel. With a powerful 1.5 HP electric motor and 2 cutting speeds (54 & 108 RPM), the saw is ideal for cutting pipes and bars and is also capable of slotting. HP: 1.5, Dimensions L x W x H (in.): 27 x 25 x 61 Cast dual pivot saw head Cuts 1 3/8in. round solid steel @ 90° Cuts 3 1/32in. x 2in. rectangle solid steel @ 90° Cuts 2 1/2in. square solid steel @ 90° Cuts 3 1/8in. round steel tubing @ 90° Cuts 2 3/8in. square steel tubing @ 90° Powered by 1.5 HP 220V 3-phase motor Flood-style coolant system with 1 1/2-gallon tank Hardened and ground worm and wheel gearbox Heavy-duty cast iron frame base 30in. material length stop Safety guards 27in.L x 25in.W x 61in.W overall
DELTA 37-365X 8'''' Precision Jointer DJ-20
The DELTA 37-365X includes 1-1/2 HP, 120/240 Volts, 60 hz, Single Phase motor, 3-knife cutterhead module, cutterhead guard with wrenches, rabbeting ledge, tilting fence, push blocks, two pulleys, instruction manual, **Runs on sealed, lubricated-for-life ball bearingsUnique parallelogram support system allows the table to move in the same arc as the cutterhead when raised or lowered. This uniform, close clearance to the cutting blade acts as a more efficient chip breaker.Cast-iron assures less vibration; cabinet stand completely encases motor and pulleys to protect from dust and shavings.Specially-designed cast-iron fence is extra long for continued support throughout the cut. Fence is center-mounted and functions as a rear guard on narrow cuts.Modular cutterhead provides a consistently clean cut. Jack-screw arrangement allows easy replacement and adjustment of individual knives. In the event the entire cutterhead has to be removed, a new module can be fitted in place without production down-time.Extra-long infeed table provides a full 76-1/2 of work support.
DELTA 31-735B 6'''' Belt/12'''' Disc Finishing Machine
The DELTA 31-735B includes 1-1/2 HP, 200-230/460V 60 hz, 3450 RPM Three Phase TEFC motor, 24V push-button station, magnetic starter, transformer, 3-leg overload protection LVC, 2 tilting tables, 4 1/2 arbor pulley, guard for arbor pulley, V-belt, 80-grit aluminum oxide belt, 50-grit aluminum oxide disc, instruction manual, 3 phase electricals will be supplied wired for 230V, unless 460V is specified. Power cord and plug supplied for single phase only. Motors and motor controls may be ordered unmounted.4 dust port can be used with the micron bag provided or can be attached to a standard 4 dust collection system and built-in dust collector fan that collects dust from the body of the machine and exhausts into the bag. 5 micron bag provided but is not intended for metal dust collection, but is for wood sanding only.Integrated mobile base for ease of mobility.The right speeds make it well suited for both metal and wood shopsBelt operates at any angle - vertically, horizontally or any degree in betweenLarge tables are scientifically ribbed to prevent distortion.Furnished with sliding pivot pin for circle sanding.
FREE SHIPPING — Makita Cordless Combo Kit — 15-Pc. Set, 18 Volt LXT Li-Ion, Model# LXT1500
This Makita 18V lithium-ion combo tool kit includes a wide variety of high-quality tools, all powered with versatile, high-powered battery packs that provide superior performance. U.S.A. Tools Included: Hammer driver, circular saw, reciprocating saw, impact driver, cutoff angle grinder, impact wrench, rotary hammer, angle drill, Storage Case Included: Yes, Volts: 18, Battery Type: LXT Li-Ion 3.0Ah, Battery Included: Yes, Charger Included: yes LXT lithium-ion batteries and optimum charging system produce up to 430% total lifetime work with 2.5x more cycles than other batteries 30-minute Rapid Optimum Charger technology actively controls current, voltage and temperature 1/2in. Hammer drill/driver with 4-pole motor delivers 450 in.-lbs. of torque 6 1/2in. circular saw with D335 high torque motor delivers maximum power for cutting 2x material at 45° Reciprocating saw features tool-free blade changes and shoe adjustments Impact driver provides 1330 in.-lbs. of torque, 3200 IPM 4 1/2in. cordless cutoff/angle grinder produces 10,000 RPM for faster grinding 1/2in. impact wrench delivers 170 ft.-lbs. of torque and 3000 IPM 7/8in. SDS-plus rotary hammer features rotation, hammering or hammering and rotation modes 3/8in. angle drill includes low-profile keyed chuck, paddle switch and integrated LED job light Blower provides maximum air velocity of 179 MPH 5 3/8in. metal cutting saw with comfort grip and built-in LED job light 1/2in. high-torque impact wrench delivers 325 ft.-lbs. of maximum torque Drywall screwdriver produces 4000 RPM for fastening to metal or wood studs Dual fluorescent/incandescent flashlight includes built-in hanger and 4-hour run time in fluorescent mode 4-position flashlight with xenon bulbs runs over 4 hours AM/FM jobsite radio includes 10 preset buttons and MP3 compatibility
FREE SHIPPING — Milwaukee Electromagnetic Drill Press Base and 2-Speed, 12.5 Amp Motor — Adjustable Position, Model# 4208-1
This combination unit features the 4203 adjustable position, variable speed base and the 4297-1 1 1/4in. drill motor. The electromagnetic variable speed adjustable base features solid state electronic switching and an 11in. drill travel. Adjustable position on this base makes lining up the bit easier and faster. All you need is a bit and you are ready to drill into any ferrous material 1/2 in. and thicker. U.S.A. Volts: 120, Amps: 12.5, Speed (RPM): 500/250, Speeds (qty.): 2, Drilling Capacity (in.): 1 1/4, Chuck Size (in.): No. 3MT Includes motor and adjustable position, variable speed base For use on any flat ferrous material, 1/2in. and thicker 12.5 Amp, 500/250 RPM motor with 1 1/4in. drill capacity Solid state electronic switching 11in. drill travel Motor/magnet lockout prevents de-mag during operation Feedback speed control Computer-controlled reverse Full wave holding power 9ft. fixed cord
DELTA 50-765 5 HP Dust Collector 4800 CFM
The DELTA 50-765 includes motor and blower, support frame, 2 1 micron filtration bags, 4 6 mil plastic chip collection bags, 2 snap in bag rings, 4 5 intake ports, 4 swivel caster assemblies, instruction manualStandard 1 micron filtration bags keep your shop safer and cleaner.Powerful TEFC induction motor for long-lasting, smooth performance with protection from damaging dust. The dust ports and motor housing can be oriented facing up or down.Snap-in bag rings are faster, easier and eliminate need for cam-over-lock style clamps.6 mil plastic chip collection bags show you when the bags need emptying.Sturdy steel base with four easy-gliding wheels for moving from machine to machine or for storing out of the way.
FREE SHIPPING — Milwaukee Electromagnetic Drill Press Base and 2-Speed, 12.5 Amp Motor — Adjustable Position, Model# 4209-1
This combination unit features the 4203 adjustable position, variable speed base and the 4292-1 1 1/4in. drill motor. The electromagnetic variable speed adjustable base features solid state electronic switching and an 11in. drill travel. Adjustable position on this base makes lining up the bit easier and faster. All you need is a bit and you are ready to drill into any ferrous material 1/2 in. and thicker. U.S.A. Volts: 120, Amps: 12.5, Speed (RPM): 750/375, Drilling Capacity (in.): 1 1/4, Chuck Size (in.): No. 3MT Includes motor and adjustable position, variable speed base For use on any flat ferrous material, 1/2in. and thicker 12.5 Amp, 750/375 RPM motor with 1 1/4in. drill capacity Solid state electronic switching 11in. drill travel Motor/magnet lockout prevents de-mag during operation Feedback speed control Computer-controlled reverse Full wave holding power 9ft. fixed cord
DELTA 31-735A 6'''' Belt/12'''' Disc Finishing Machine
The DELTA 31-735A includes 1 1/2 HP, 240 Volts, 60 hz., 3450 RPM Single Phase TEFC motor and push-button switch, two tilting tables, 4 1/2 arbor pulley, guard for arbor pulley, V-belt, 80-grit aluminum oxide belt, 50-grit aluminum oxide disc., instruction manual, 1 phase electricals will be supplied wired for 240V. Power cord and plug supplied for single phase only. Motors and motor controls may be ordered unmounted.4 dust port can be used with the micron bag provided or can be attached to a standard 4 dust collection system and built-in dust collector fan that collects dust from the body of the machine and exhausts into the bag. 5 micron bag provided but is not intended for metal dust collection, but is for wood sanding only.Intregrated mobile base for ease of mobility.The right speeds make it well suited for both metal and wood shops.Belt operates at any angle-vertically, horizontally or any degree in between.Large tables are scientifically ribbed to prevent distortion.Furnished with sliding pivot pin for circle sanding.
DELTA 50-764 5 HP Dust Collector 4800 CFM
The DELTA 50-764 includes motor and blower, support frame, 2 1 micron filtration bags, 4 6 mil plastic chip collection bags, 2 snap in bag rings, 4 5 intake ports, 4 swivel caster assemblies, instruction manualStandard 1 micron filtration bags keep your shop safer and cleaner.Powerful TEFC induction motor for long-lasting, smooth performance with protection from damaging dust. The dust ports and motor housing can be oriented facing up or down.Snap-in bag rings are faster, easier and eliminate need for cam-over-lock style clamps.6 mil plastic chip collection bags show you when the bags need emptying.Sturdy steel base with four easy-gliding wheels for moving from machine to machine or for storing out of the way.** 460V operation requires replacement of the motor starter. This part is available from your industrial electrical supply dealer. **
Makita KP312 12-1/4-inch Portable Hand Planer
The Makita KP312 12-1/4-inch Hand Planer is the largest portable planer available, ideal for timber framer and log home industries. The powerful 15 Amp motor spins the blade at up to 12000 RPM to cut 24000 cuts per minute. With such an optimum performance this Makita tool is well known for precision cuts. The front roller provides smooth movement over rough surfaces making the passes nearly effortless. The large ejection chute keeps the unit clean with its high rate of chip discharge, and effectively prevents any blockage due to wet chips while chipping dry. The easily accessible large depth setting knob of the power tool makes for easy adjustment.This Makita hand planer also features a rubber gripped handle which provides greater comfort and control. The easily accessible brushes adds to the serviceability and a specially designed rear foot promises greater protection of the planer blades and a ball bearing construction ensures precise cuts. Features: Poly "V" belt designed with grooves efficiently transfers power from the motor to the blades Front roller for easy moving over rough materials Large ejection chute provides high rate of chip discharge and helps prevent clogging from wet or dry wood chips Ideal cord location and length, 33-feet, helps prevent obstruction during long and repeated passes Rubberized front handle for comfort, control, and reduced operator fatigue Large, conveniently located depth setting knob for easy adjustment Foot located at rear of base protects planer base and blades from becoming damaged Guide rule for accurate and maximum use of planing width Externally accessible brushes for easier serviceability Ball bearing construction for longer tool life What's In The Box: Makita KP312 12-1/4-Inch Portable Hand Planer Socket Wrench Triangular Rule Double Edged High Speed Steel Blades
FREE SHIPPING — Milwaukee Electromagnetic Drill Press Base and 12.5 Amp Motor — Adjustable Position, Model# 4206-1
This combination unit features the 4203 adjustable position, variable speed base and the 4262-1 3/4in. drill motor. The electromagnetic variable speed adjustable base features solid state electronic switching and an 9in. drill travel. Adjustable position on this base makes lining up the bit easier and faster. All you need is a bit and you are ready to drill into any ferrous material 1/2 in. and thicker. U.S.A. Volts: 120, Amps: 12.5, Speed (RPM): 350, Drilling Capacity (in.): 3/4, Chuck Size (in.): 3/4 Includes motor and adjustable position, variable speed base For use on any flat ferrous material, 1/2in. and thicker 12.5 Amp, 350 RPM motor with 3/4in. drill capacity Solid state electronic switching 11in. drill travel Motor/magnet lockout prevents de-mag during operation Feedback speed control Computer-controlled reverse Full wave holding power 9ft. fixed cord
DELTA RS830 10'''' Professional Radial Arm Saw
The DELTA RS830 includes stand, 1-1/2 HP, 120/240 Volts motor, automatic blade brake, 10 saw blade, blade wrenches, instruction manualCast-iron track, column and column support for rigidity and continued accuracy.Depth-of-cut control handle and locking levers are positioned above the table for easy access.Steel stand for sturdy support.Extra-large table provides support for wide panels or large workpieces.Provides greater cutting capacity for cross-cutting nominal 2 thick stock up to 16 wide.Miter cutting capacities in nominal 2 thick stock are 10-1/2 at 45 left and 11 at 45 right.Dual-threaded shaft accepts a number of accessories to expand the use of saw.
Generac 7000 Watt XG Series Portable Generator
* Portable generator * Generac OHVI engine * Illuminated control panel * Powerbar monitors watt usage * Engine controls located on panel * Full wrap,, heavy-duty frame tubing * Never flat,, rally style wheels * Hour meter with maintenance resets * Covered outlets for protection from the elements * Low oil shutdown to prevent engine damage * GFCI outlet protection * Four 5-2OR GFCI connection outlets * One L14-30OR connection outlet * Two 20 amp circuit breakers * Two 30 amp circuit breakers * Manual * 120 and 240 VAC * 410cc * 60 Hz * 360 engine RPM * 9 gallon fuel tank capacity * Maintenance kit included * 7000 A/C rated output watts * 8750 A/C maximum output watts * Electric or manual * 9.5” solid wheels * 31.5” x 25.5” x 28”
FREE SHIPPING — Milwaukee Electromagnetic Drill Press Base and 3/4in. Motor — Fixed Position, Model# 4210-1
This combination unit features the 4202 fixed position, variable speed base and the 4262-1 3/4in. drill motor. The electromagnetic variable speed base features solid state electronic switching and an 9in. drill travel. All you need is a bit and you are ready to drill into any ferrous material 1/2 in. and thicker. U.S.A. Volts: 120, Amps: 12.5, Speed (RPM): 350, Drilling Capacity (in.): 3/4, Chuck Size (in.): 3/4 Includes motor and fixed position, variable speed base For use on any flat ferrous material, 1/2in. and thicker 12.5 Amp, 350 RPM motor with 3/4in. drill capacity Solid state electronic switching 9in. drill travel Motor/magnet lockout prevents de-mag during operation Feedback speed control Computer-controlled reverse Full wave holding power 9ft. fixed cord
FREE SHIPPING — Darex Light-Duty Drill Sharpener, Model# V390
Sharpen the most common drill bits in under a minute using an easy 3-step sharpening system that makes everyone a drill sharpening expert. The Darex V390 sharpens drill bits 1/8in.-3/4in. (3-19mm) and 118° to 140° with ease. U.S.A. Bit Sizes (SAE): 1/8 to 3/4, Bit Sizes (mm): 3–19, Angle Sharpening (deg.): 118 to 140, Cobalt Bits: Yes Includes an adjustable split-point feature and relief control for greater point style variation Recommended for light duty — 35-50 drills per week Comes standard with Borazon wheel for HSS and cobalt drill bits Optional diamond wheels for carbide bits sold separately
FREE SHIPPING — Makita Cordless Combo Kit — 12-Pc. Set, 18 Volt LXT Li-Ion, Model# LXT1200
This Makita 18V lithium-ion combo tool kit includes a wide variety of high-quality tools, all powered with versatile, high-powered battery packs that provide superior performance. U.S.A. Tools Included: Hammer drill/driver, impact driver, grinder, reciprocal saw, circular saw, impact wrench, torary hammer, angle drill, screwdriver, Storage Case Included: Yes, Battery Type: 18V Li-Ion batteries, Battery Included: Yes, Charger Included: Yes LXT lithium-ion batteries and optimum charging system produce up to 430% total lifetime work with 2.5x more cycles than other batteries 30-minute Rapid Optimum Charger technology actively controls current, voltage and temperature 1/2in. hammer drill/driver with 4-pole motor delivers 450 in.-lbs. of torque 6 1/2in. circular saw with high torque motor delivers maximum power for cutting 2x material at 45° Reciprocating saw features tool-free blade changes and shoe adjustments Impact driver provides 1330 in.-lbs. of torque, 3200 IPM 4 1/2in. cordless cutoff/angle grinder produces 10,000 RPM for faster grinding 1/2in. impact wrench delivers 170 ft.-lbs. of torque and 3000 IPM 7/8in. SDS-plus rotary hammer features rotation, hammering or hammering and rotation modes 3/8in. angle drill includes low-profile keyed chuck, paddle switch and integrated LED job light Drywall screwdriver produces 4000 RPM for fastening to metal or wood studs Dual fluorescent/incandescent flashlight includes built-in hanger and 4-hour run time in fluorescent mode 4-position flashlight with xenon bulbs runs over 4 hours AM/FM jobsite radio includes 10 preset buttons and MP3 compatibility
FREE SHIPPING — Milwaukee Electromagnetic Drill Press Base and 7.2 Amp Motor — Adjustable Position, Model# 4204-1
This combination unit features the 4203 adjustable position, variable speed base and the 4253-1 1/2in. drill motor. The electromagnetic variable speed adjustable base features solid state electronic switching and an 9in. drill travel. Adjustable position on this base makes lining up the bit easier and faster. All you need is a bit and you are ready to drill into any ferrous material 1/2 in. and thicker. U.S.A. Volts: 120, Amps: 7.2, Speed (RPM): 600, Drilling Capacity (in.): 1/2, Chuck Size (in.): 1/2 Includes motor and adjustable position, variable speed base For use on any flat ferrous material, 1/2in. and thicker 7.2 Amp, 600 RPM motor with 1/2in. drill capacity Solid state electronic switching 9in. drill travel Motor/magnet lockout prevents de-mag during operation Feedback speed control Computer-controlled reverse Full wave holding power 9ft. fixed cord
DELTA 32-325 Line Boring Machines
The DELTA 32-325 includes 3/4HP, 1725 rpm, single phase motor;, Table and fence assembly, Left and right indexing pins, Left and right work stops, 13-spindle boring head, See through spindle guard, Telescoping handle, Table, Adjustable depth stop, Steel support structure and base,, Wrench and literature holder and instruction manual., Instruction manualLarge, 16 X 29 3/4 table provides a full 12 of work space in front of the boring head for boring extra-large boardsFully-adjustable table and fence assembly features easy-to-read English and Metric scales for quick set-up and accurate boring.Indexing pins help operator to maintain correct spindle alignment for resuming line boring operations in long workpiecesWork stops on either end of the fence allow operator to line up work from the left or right for performing parallel boring patterns.Adjustable depth stop controls the downward travel of boring head.Heavy-gage, sheet steel support structure has a sturdy steel base with holes for bench or stand mountingPowerful 3/4 HP motor delivers plenty of power and speed for multiple hole boring even in the toughest laminates.Large-capacity, 13-spindle boring head comes with a see-through spindle guard for safetyTelescoping handle, featured on No.32-325, extends from 16 to 23 for increased leverage when needed; retracts when not in use.
Flex 457.502 2-1/4-in Pencil Edge Profile Wheel Pos.1
The Flex 457.502 is a 2-1/4-Inch Pencil Edge Profile Wheel. FLEX manufactures top performance, quality power tools. Flex continuously explores new technological frontiers and implement designs that increase the lifespan and performance of each tool. Flex also focuses on optimizing the handling of each tool and increasing the overall comfort and productivity of the end user. Everything Flex does is based on people and their work and this leads to solutions. Features: Use this grinding wheel for carving marble and granite with the Flex wet milling machines What's In the Box: Flex 457.502 2-1/4-Inch Pencil Edge Profile Wheel
DELTA 36-855 Production Stock Feeder
The DELTA 36-855 includes 1HP 230V 1 Phase two-speed reversing motor, Power cord, Two speed gear lever, Four rubber feed rollers, Vertical and horizontal support columns, Universal joints and lubricating gun.Rugged, Efficient Drive System. continuous-duty motor powers the lubricated gear box, which transmits power to roller chains and sprockets that drive feed rollers. This superior system assures positive feeding of all types of materials.Fully-Adjustable Support columns. Feeders come equipped with sturdy vertical and horizontal support columns and universal joints that feature either T or L locking mechanisms for securing feeders into horizontal, vertical or angled-feeding positions. Large handwheels move feeders horizontally or vertically along columns. Four bolts hold vertical support column to table surface
FREE SHIPPING — Makita Cordless Combo Kit — 9-Pc. Set, 18 Volt LXT Li-Ion, Model# LXT902
This Makita 18V lithium-ion combo tool kit includes a wide variety of high-quality tools, all powered with versatile, high-powered battery packs that provide superior performance. U.S.A. Tools Included: Hammer drill/driver, circular saw, cutoff angle grinder, reciprocating saw, impact driver, impact wrench, rotary hammer, Battery Type: LXT Li-Ion 3.0Ah, Battery Included: Yes, Charger Included: Yes LXT lithium-ion batteries and optimum charging system produce up to 430% total lifetime work with 2.5x more cycles than other batteries 30-minute Rapid Optimum Charger technology actively controls current, voltage and temperature 1/2in. hammer drill/driver with 4-pole motor delivers 450 in.-lbs. of torque 6 1/2in. circular saw with high torque motor delivers maximum power for cutting 2x material at 45° 4 1/2in. cutoff/angle grinder produces impressive 10,000 RPM for faster grinding Reciprocating saw features tool-free blade changes and shoe adjustments Impact driver provides 1330 in.-lbs. of torque, 3200 IPM 1/2in. impact wrench delivers 170 ft.-lbs. of torque and 3000 IPM 7/8in. SDS-plus rotary hammer features rotation, hammering or hammering and rotation modes 4-position flashlight with xenon bulbs runs over 4 hours AM/FM jobsite radio includes 10 preset buttons and MP3 compatibility Set includes 2 LXT lithium-ion, 3.0Ah batteries, 30-minute charger, wheeled contractor bag with telescoping handle
FREE SHIPPING — Husqvarna Tile Saw — 1 1/2 HP, Model# Tilematic TS 250 X3
Husqvarna Tile Saw cuts up to 18in. diagonally or 24in. rip cuts in tile and bricks. Motor has dual capacitors to aid low-voltage motor starting, is totally enclosed and fan cooled for long service life. Poly V-belts are smooth running with less vibration, which reduces belt slippage and transmits more power to blade shaft. Blade rotates at 2760 RPM to make cuts up to 3 3/4in. deep. U.S.A. HP: 1 1/2, Common Usage: Tile, Speed - No Load (RPM): 2,760, Cutting Length (in.): 18 (diagonally), 24 (rip), Cutting Thickness (in.): 3 3/4, Blade Diameter (in.): 10 1 1/2 HP, 115V Baldor high-torque, continuous-duty electric motor Bladeshaft lock for easy blade changes Rust-resistant steel sliding pan enables easy operation Large 18in. x 16 1/2in. conveyor cart supports larger tile Spring-assisted plunge cuts UL and CSA rated Includes 10in. premium blade
Flex 457.561 2-1/4-In Full Bullnose Profile Wheel Pos 1
The Flex 457.561 is a 2-1/4-Inch Full Bullnose Profile Wheel. FLEX manufactures top performance, quality power tools. Flex continuously explores new technological frontiers and implement designs that increase the lifespan and performance of each tool. Flex also focuses on optimizing the handling of each tool and increasing the overall comfort and productivity of the end user. Everything Flex does is based on people and their work and this leads to solutions. Features: Use this grinding wheel for carving marble and granite with the Flex wet milling machines What's In the Box: Flex 457.561 2-1/4-Inch Full Bullnose Profile Wheel
